Products manufactured by Umicore
- AGGREGATE FOR CONCRETE
- ARSENIC TRIOXIDE - powder
- Automotive Catalysts
- CADMIUM - carbonate, sulphide
- CADMIUM TELLURIDE - dust-free powder, purity 5N
- Cobalite® - fine Co/Fe/Cu/Ni alloyed powders
- COBALT - high purity cathodes, purity 5N
- COBALT - powders, oxides, hydroxide, acetate, chloride, carbonate, sulphate, nitrate, acetate
- Contact and Electronic Packaging materials
- COPPER - cathodes, Contirod, Numrod, Foxrod, predrawn wire, billets, cakes, nuggets
- COPPER powder and flakes
- ELECTRONIC POWDERS
- Fine Zinc powders/dust for paints, chemical applications, plating
- Fuel Cells
- GASIR - aspherics, diffractive, discs, ingots
- GASIR - Chalcogenide glass, moulded lenses, spherics
- GERMANIUM: crystals, polished wafers, substrates
- GERMANIUM: lenses, windows, powder, high purity, granules, metal ingots
- GERMANIUM: tetrachloride, dioxide
- GOLD - 4N (ASTM B562-95), ingots and granules
- INDIUM - hydroxide, oxide, acetate, sulfate, cyanide, sulfamate, fluoborate, purity 3N7 - 6N8
- INDIUM - trichloride, ITO, alloys, ingots, foil, shell, purity 3N7 - 6N8
- LEAD - alloys: Pb-Cu, Pb-Bi, Pb-Bi-Cu, Pb-Bi-Cu plus
- LEAD - refined: 3N7 (HER), 3N85 (HER plus), 4N (HER plus crystal)
- LEAD - rolled
- LITHIUM - metal oxides
- MANGANESE - acetate, nitrate
- NICKEL - sulphate, hydroxide, carbonate, oxide, nitrate, acetate, powder
- PALLADIUM - 3N5 (ASTM B589-94), powder (100 p.c. < 10 mesh)
- PLATINUM - 3N5 (ASTM B561-94), powder (100 p.c. < 10 mesh)
- REMELTED ZINC - Ingots
- RHODIUM - 3N5 (ASTM B616-96), powder (100 p.c. < 10 mesh)
- SELENIUM - powder, shots, lumps, alloys, ingots, purity 3N - 5N
- SILICON - polished wafers
- SILVER - 3N and 4N (ASTM B413-97A), ingots and granules
- SODIUM ANTIMONATE - powder
- SODIUM SELENITE - powder
- SPUTTERING TARGETS
- SULPHURIC ACID 96 p.c. and 98 p.c.
- TELLURIUM - dioxide, powder, ingots, shots, lumps, purity 2N5 - 5N
- THALLIUM - metal and salts, purities 2N5 - 5N
- ZINC - sheets and coils, rainwater systems, flashings, roofing and facade systems
- ZINC ALLOYS FOR CONTINUOUS GALVANIZING - CGG - Pre-alloyed zinc product
- ZINC ALLOYS FOR CONTINUOUS GALVANIZING - Galfan® - Zn-Al based alloy
- ZINC ALLOYS FOR CONTINUOUS GALVANIZING - Pellets - Pure zinc shot
- ZINC ALLOYS FOR DIECASTING - Superloy® - Hot chamber alloy (7 p.c.Al-3.8 p.c.Cu)
- ZINC ALLOYS FOR DIECASTING - X28 - Hot chamber alloy (27 p.c.Al-18 p.c.Cu)
- ZINC ALLOYS FOR DIECASTING - Zamak® 2,3,5 - Zinc alloys for pressure diecasting
- ZINC ALLOYS FOR GENERAL GALVANIZING - Galva 5 - Zn-5 p.c.Al alloy
- ZINC ALLOYS FOR GENERAL GALVANIZING - Galveco® - Zn-Ni-Sn-Bi based alloy
- ZINC ALLOYS FOR GENERAL GALVANIZING - Technigalva® - Zn-Ni based alloy
- ZINC OXIDE - powder and granulated for pharmaceutical, paint, agriculture applications
- ZINC OXIDE - powder and granulated for rubber, tyres, ceramics, glass, chemicals, cosmetic
- ZINC PHOSPHATE - Anti-corrosion paints and coatings
- ZINC SELENIDE - plates, discs, lenses , chips
- ZINC SULPHATE - Pure zinc sulphate solution (11.5 p.c. Zn)
- ZINC SULPHIDE - plates, discs, lenses , chips
- ZINTANE - Zinc strips for electric fuses
View Hoboken (Belgium) plant after the facelift (early 2009).Photo: Conix Architects.
Two established Belgian names sponsor Belgian fuel cell powered racing kart.